Pre Cat Lacquer Problems
Pre Cat Lacquer Problems. The exact cause of the problem. Precatalyzed lacquer with 6 months working pot life;
Move down a 1 per pass going quicker horizontally, if that makes sense. The only fix is to strip and start over. Roughness or sometimes white looking fuzz stuck in the finish surface.
Precatalyzed Lacquer With 6 Months Working Pot Life;
Medium and fast thinners make blushing worse, especially the fast thinner. Roughness or sometimes white looking fuzz stuck in the finish surface. The exact cause of the problem.
Every Factor That May Have A Bearing Upon The Finishing Or Coating Operation From The Wood Specie Through The Rubbing And Polishing Process Should Be Taken.
What i do now though, is forget the % pass stuff, and spray fast, and move down less. Or spraying into blind corners. The only fix is to strip and start over.
If You Have A Problem With The Lacquer Drying To Fast Then Add A.
Mek will evaporate much quicker and not get trapped. If your finish is not drying, there's something wrong. Thus allowing you to apply the.
This Sounds More Like You Did Not Wet Out The First Coat Nearly Enough (It Went On Too Dry), Or You Had.
Move down a 1 per pass going quicker horizontally, if that makes sense. Lacquer retarder is a slower evaporating lacquer thinner.
Post a Comment for "Pre Cat Lacquer Problems"